Anna's-projects

Here is a model of a house. This house has a spiral stair, a living room adjacent to the kitchen, a lobby, storage space, and a bathroom on the first floor. The second floor contains two bedrooms, two storage spaces, one bathroom and a balcony. Your browser does not support iframes.

Here is my second spiral staircase model . Here are the dimensions: Height of riser-200mm Height of floor-3000mm Diameter-2600mm Number of tread-14 Number of riser-15 Rotation-360 degrees Angle of stair-25.71 degrees Length of stair-1000mm Width of stair in the middle-240mm

Here is the model of a spiral staircase. These are the variables required for the staircase. Floor height=96" Rotation of the stair=360 degrees Number of riser=16" Height of riser=96/16=6" Number of tread=16-1=15 Angle=360/15=24 degrees

This is my incomplete violin model. Violin is a very complex instrument. The model was made using extrusion, partition, vertex, line, and ark. The real violin was used as a reference.

Here is a small house. It  includes two levels, one bathroom, two bedrooms, one balcony and a kitchen adjacent to the living room. Here are renders of the house in Sweet Home 3D. Big Bedroom Living Room with Purple Walls Same Living Room with White Walls Kitchen Hallway on Second Floor Balcony Small Bedroom Your browser does not support iframes.

Here is the model of the latest house in Sweet Home 3D. Here is the link to PDF file of first and second floor. This is the link to the file. This is the basement. Includes two bedrooms, and one bathroom with a washing machine. This is the ground floor. Includes a living room, kitchen and toilet. This is a render of the kitchen.

Here is a model of a house that I designed on my own. The plan includes a basement and ground floor. There are several mistakes in the design: 1) The stairs are too steep. This happened because the standard stair dimensions were not taken into account when designing the house. 2) The exterior wall is slightly crooked. 3) In Salome-Platform, I had difficulty creating faces due to many unnecessary lines in the plan. 4) Water will fall from the roof into the wells because they are not protected by a cover. Your browser does not support iframes.  

Here is a 3D model of another house. This house includes L-shaped stairs, a garage, and a bathroom inside stars. It is a very simplified design. The stairs, roof and ramp where build using vertexes and lines. The rest of the house was built using operation extrusion. Your browser does not support iframes.

Here is my 3D model of a house. The link includes 3D model and 2D floor plan. The 3D model is unfinished, but presents a basic design. Your browser does not support iframes.

Here is a 3D design of a cat form for cookies. Sketch the design on paper. Then inert picture in DraftSight and draw over the image. Use command offset to make thickness. Move the picture to GCAD and save it as IGES. (DraftSight does not have IGES format.) Import the picture into Salome. Use operation extrude to make 3D model. Extrude the face so that it will imprint on the dough. Use operation 3D chamfer to make chamfer on the outside contour of the model. Scale the model in cm. Your browser does not support iframes.