Yogurt Can In Salome-Platform

Here is a 3D design of a yogurt can (250 ml).
1) Create rectangle (base)
2) Explode rectangle to get wire.
3) Fillet corner points of the wire.
4) Scale new wire 2 times (1.2 and 1.3 are the scale factors)
5) Translate scaled wires up to create shape of can.
6) Use fill operation to create side surface of the can.
7) Create top and bottom faces
8) Create shell and build solid inside closed volume ( between filled face, top face and bottom face).
9) Check volume of yogurt inside can. We got 168.44 cm^3. Target volume: 250 cm cubed. Scale the model using scale factor from equation: V2/V1=K^3
K=(250/168.44)^(1/3).
After scale of solid, explode it to get new scaled faces.
10) Create rectangle with fillets, and translate it to the top of the can.
This is the surface where the foil will be glued.
Use boolean>cut to create cut out on the top. 
11) Combine all shells into one shell and apply thickness to get the can for mold.
Finally, we scale the model to get meters, because Salome-Platform understands meters only.